Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone

Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
  • Sellerfobajob.com
  • List PriceUS$20.14piece
  • Sale PriceUS$20.14piece
  • ShippingFree Shipping
  • Ratings4,5 (798)

Product Description

Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250

Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone

Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Eachine Customized Version Racing F3 Acro 6DOF Flight Controller STM32F303 For Eachine Racer 250 RC Drone
Description:
Brand: Eachine
Item name: Racing F3 Acro 6DOF Flight Controller
Size: 36x36mm board with 30.5mm mounting holes
Weight: 5 grams
Usage: for Eachine racer 250 and other RC Multirotors
STM32F303 CPU with FPU 256kB flash.
8MB (64Mbit) High-Capacity Flash
MPU6050 accelerometer/gyro.
Micro USB socket
4x 4pin JST-SH sockets (I2C, SWD, 2xUART).
2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND).
8x 3pin though-holes for pin headers for ESC/Servo connections.
2x 4pin though-holes for pin headers for 2x serial ports.
2x 2pin though-holes for pin headers for battery voltage and buzzer.

Features:
Acro versionStandard model for racing/acro flying
No-compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
Flight LoggingOn-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup with- out guesswork.
Nextgeneration STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
Stackable designperfect for integrating with OSDs and power distribution boards.
16 PWM I/O lines16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
OneShot ESCFull support for OneShot ESCs for easy PID tuning and a sharper response.
Broad RC receiver SupportSupports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Programmable LEDDedicated output for programmable LEDs-great for orientation, racing and night flying.
I2C portDedicated I2C port for connection of OLED display without needing flight battery.
Battery MonitoringBattery monitoring ports for voltage and current.
SonarSonar support for precision low-altitude hold.
BuzzerBuzzer port for audible warnings and notifications.
SWDDeveloper friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
Symmetrical designSymmetrical design for a super tidy wiring.
Wire upWire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
Barometer Barometer mounted on the bottom of the board for easy wind isolation.
Loop timesLoop times up to ~2x as fast as previous-generation STM32F1 based boards.
ConfigurationConfiguration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
Supports Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.
Package included:
1 x Eachine Racing F3 Acro 6DOF Flight Controller